Couldn't load pickup availability
A simple gap fix
A flexible, self-adhesive strip you can cut to fit suitable doors, windows and shower doors. Peel, position and press for a neater edge.
Small gaps add up
A narrow gap can let air, dust or light pass around a door or window. This cut-to-length strip helps cover suitable gaps without adding bulky hardware.
Measure the opening first and make sure the door or panel can still move freely once the strip is in place.
Everyday flexibility
Cut the roll into lengths that match the doors, windows or panels you want to seal.
Choose white, brown or transparent to suit the surface where you plan to apply it.
Install in four steps
Remove dust, grease and moisture. Let the application area dry completely.
Measure the gap and test that the door or panel will still close freely.
Cut the strip with scissors, then peel the backing gradually as you align it.
Press firmly end to end. Avoid pulling or soaking the strip while the adhesive sets.
Where it fits
Cover a suitable small gap near an edge while keeping the door easy to open and close.
Measure the contact edge and cut only the length you need.
Help reduce splashes through a suitable gap. This strip is not a repair for failed waterproofing.
Product details
Approximate roll length: 16.4 ft / 5 m. Reference width: about 1.38 in / 35 mm. Each selected variant weighs 85 g.
Choose from White, Brown or Transparent, then trim the roll to the lengths you need.
Care and fit
Check that the surface is smooth, clean and dry. Dry-fit the strip with the door closed, then test a hidden area on sensitive finishes.
Press the full length firmly and give the adhesive time to bond. If removing it later, peel slowly; residue or finish damage may occur on some surfaces.
This strip is intended for suitable small gaps. It does not replace repair of damaged frames, large openings or shower waterproofing.
Cut-to-fit design
The strip bends around suitable straight edges and comes with an adhesive backing for tool-free placement.
For best adhesion, apply to a clean, dry, smooth surface. Test a small hidden area first on delicate finishes.
CUSTOMER REVIEWS
“There was a small gap around our front door that let in a chilly breeze. I cut the strip to fit and pressed it onto the cleaned surface. The entryway feels more comfortable now, and the door still opens and closes smoothly.”
“I’m not especially handy, so I appreciated the simple peel-and-stick design. I measured the area, trimmed the strip with scissors, and applied it along my window frame. It looks neat and was an easy little weekend project.”
“I used the clear strip along a small gap in my shower door where water tended to splash through. It blends in nicely with the glass and has helped keep the floor outside drier. I like that it doesn’t stand out in the bathroom.”
Common questions
Yes. Measure the edge first, then trim the roll with scissors.
Clean, dry and smooth surfaces generally offer the best adhesion. Test a small hidden area before full application.
It can help reduce splashes through a suitable gap, but it is not a waterproofing repair or a guaranteed watertight seal.
One roll in the color selected. The roll is approximately 16.4 ft / 5 m long.
Peel back slowly. Adhesive residue or damage to a delicate finish is possible, so test a hidden spot first.
